Stainless steel metal mesh glove providing complete protection and perfect safety during boning and meat cut-up. High level of puncture resistance, stops knife blades to prevent cuts. Ambidextrous five finger protective glove, easy to put on and remove. Almost as comfortable as a knitted glove, can fit to all morphologies.
100% stainless steel metal mesh glove. Made of food-grade stainless steel wire, for good hygiene conditions and great ease of maintenance (resistant to cleaning and disinfection products).
This stainless steel metal mesh glove is available with or without cuff. The cuff provides great forearm protection.
This stainless steel metal mesh glove is fitted with a patented closing system with an ultra flat stainless steel spring firmly attached to the rings of the chainmail. The system makes the closing auto-adjustable, so that the stainless steel mesh glove perfectly fits the mophorlogy of the operator. This system also ensures a perfect closing day after day.
This stainless steel metal mesh glove is completely fastened with no side slit.
Stainless steel metal mesh glove available in various sizes: from 0 to 5. Each size is identified thanks to a colour recognition system. Refer to size guide below for more information regarding sizes.
Sold individually.
Stainless steel metal mesh glove complying with requirements of the following standards: NF A 36-711, NF EN 1082-1, NF EN 14328, NF EN 1811, ISO 13999-1.
Made in France.
We recommend using glove stiffeners (sold separately) with this stainless steel metal mesh glove to better adjust the glove to the hand and improve the operator’s dexterity.
Size guide:
Sizes |
Colour |
Equivalence |
|
0 |
Brown |
5 - 5 ½ |
XXS |
1 |
Green |
6 - 6 ½ |
XS |
2 |
White |
7 - 7 ½ |
S |
3 |
Red |
8 - 8 ½ |
M |
4 |
Blue |
9 - 9 ½ |
L |
5 |
Yellow |
10 |
XL |
To find out your glove size, measure around your hand at the fullest part (exclude thumb) with a tape measure. Use your dominant hand, the right if you are right-handed, and the left if you are left-handed. Refer to size chart below (information given on an indicative basis):
Hand circumference in cm |
Sizes |
15 |
5.5 |
16 |
6 |
17.5 |
6.5 |
19 |
7 |
20 |
7.5 |
21.5 |
8 |
23 |
8.5 |
24 |
9 |
25.5 |
9.5 |
27 |
10 |
We remind you that this glove is reversible, you just have to turn the glove over completely to use it with the other hand.
Sleeve length | 15 cm |
Wire diameter | 0.5 mm |
Ring inside diameter | 3 mm |
Ring outside diameter | 4 mm |
Glove Weight (1 unit) | from 120 to 220g without cuff; from 300 to 450g with cuff |