Heavy-duty handling gloves designed to handle relatively heavy sharps objects (high protection against sharp and cutting edges), particularly in greasy environments. These heavy-duty handling gloves offer high resistance to mechanical hazards, great abrasion and blade cut resistance. Guarantee great comfort of use.
Heavy-duty handling gloves made of knitted Dyneema® fiber (glass-fiber reinforced polyamide) which provides exceptional resistance to blade cut and abrasion while guaranteeing great comfort at wearing.
Heavy-duty handling gloves fitted with a black nitrile coating on the palm and fingers (rough finish for better grip).
Sold as a pair, only available in size 9. Refer to size guide below for more information.
Heavy-duty handling gloves complying with:
- EC standards,
- general requirements for protective gloves against minimal risks (EN 420) : neutral pH, innocuousness, glove design and construction, dexterity.
- requirements for protective gloves against mechanical hazards (EN 388 standard). Glove performance levels: abrasion resistance 4, blade cut resistance 5, tear resistance 4, puncture resistance 4.
Size guide:
To find out your glove size, measure around your hand at the fullest part (exclude thumb) with a tape measure. Use your dominant hand, the right if you are right-handed, and the left if you are left-handed. Refer to size chart below (information given on an indicative basis):
Hand circumference in cm |
Sizes |
16 |
6 |
17.5 |
6.5 |
19 |
7 |
20 |
7.5 |
21.5 |
8 |
23 |
8.5 |
24 |
9 |
25.5 |
9.5 |
27 |
10 |
Length | 25 cm |
Colours | white and green Dyneema® fibre, black nitrile coating |
Glove Weight (1 unit) | 55g |